Để sử dụng toàn bộ tiện ích nâng cao của Hệ Thống Pháp Luật vui lòng lựa chọn và đăng ký gói cước.
Nếu bạn là thành viên. Vui lòng ĐĂNG NHẬP để tiếp tục.
| THE MINISTRY OF FINANCE | SOCIALIST REPUBLIC OF VIET NAM |
| No. 71/2004/QD-BTC | Hanoi, August 31, 2004 |
ADJUSTING THE PREFERENTIAL IMPORT TAX RATES OF A NUMBER OF IRON AND STEEL COMMODITIES
THE MINISTER OF FINANCE
Pursuant to the Government’s Decree No. 86/2002/ND-CP of November 5, 2002 defining the functions, tasks, powers and organizational structures of the ministries and ministerial-level agencies;
Pursuant to the Government’s Decree No. 77/2003/ND-CP of July 1, 2003 prescribing the functions, tasks, powers and organizational structure of the Ministry of Finance;
Pursuant to the Tariff according to the list of import tax-liable commodity groups, issued together with Resolution No. 63/NQ-UBTVQH10 of October 10, 1998 of the Standing Committee of the Xth National Assembly, which was amended and supplemented under Resolution No. 399/2003/NQ-UBTVQH11 of June 19, 2003 of the Standing Committee of the XIth National Assembly amending and supplementing the Tariff according to the List of import tax-liable commodity groups;
Pursuant to Article 1 of the Government’s Decree No. 94/1998/ND-CP of November 17, 1998 detailing the implementation of May 20, 1998 Law No. 04/1998/QH10 Amending and Supplementing a Number of Articles of the Law on Import Tax and Export Tax;
In furtherance of the Prime Minister’s directing opinions in Official Dispatch No. 162/TB-VPCP of August 19, 2004 on solutions to stabilize petroleum, construction steel and fertilizer markets;
At the proposal of the director of the Tax Policy Department,
DECIDES:
Article 1.- To issue together with this Decision the List of a number of iron and steel commodities and their preferential import tax rates. For the commodities of mechanical engineering steels, the preferential import tax rates specified in Clause 6, Table II, issued together with the Finance Minister’s Decision No. 110/2003/QD-BTC of July 25, 2003 shall apply.
For import goods on the List of commodities for the implementation of ASEAN countries’ Agreement on Common Effective Preferential Tariff, the tax rates specified in Decree No. 78/2003/ND-CP of July 1, 2003 shall apply according to the guidance in the Finance Ministry’s Circular No. 64/2003/TT-BTC of July 1, 2003.
Article 2.- This Decision takes effect 15 days after its publication in the Official Gazette and applies to import goods declarations submitted to the customs offices as from August 19, 2004.
...
...
...
FOR THE MINISTER OF FINANCE
VICE MINISTER
Nguyen Ngoc Tuan
OF A NUMBER OF IRON AND STEEL COMMODITIES AND THEIR PREFERENTIAL IMPORT TAX RATES
(issued together with the Finance Minister’s Decision No. 71/2004/QD-BTC
of August 31, 2004)
Code
Description
Tax rate (%)
7207
...
...
...
Semi‑finished products of iron or non‑alloy steel
- Containing by weight less than 0.25% of carbon:
7207
...
...
...
00
- - Of rectangular (including square) cross‑section, the width measuring less than twice the thickness
5
7207
12
- - Other, of rectangular (other than square) cross‑section:
7207
...
...
...
10
- - - Slabs
3
7207
12
90
- - - Other
5
7207
...
...
...
00
- - Other
5
7207
20
- Containing by weight 0.25% or more of carbon:
...
...
...
- - Containing by weight 0.6% or more of carbon:
7207
20
11
- - - Slabs
3
7207
...
...
...
12
- - - Iron or steel pieces roughly shaped by forging; sheet bars of iron or steel (including tinplate bars)
3
7207
20
19
- - - Other
5
...
...
...
- - Other:
7207
20
91
- - - Slabs
3
7207
...
...
...
92
- - - Iron or steel pieces roughly shaped by forging; sheet bars of iron or steel (including tinplate bars)
3
7207
20
99
- - - Other
5
7210
...
...
...
Flat‑rolled products of iron or non‑alloy steel, of a width of 600 mm or more, clad, plated or coated
‑ Plated or coated with tin:
7210
...
...
...
00
- - Of a thickness of 0.5 mm or more
3
7210
12
00
- - Of a thickness of less than 0.5 mm
3
7210
...
...
...
00
- - Plated or coated with lead, including terne‑plate
0
7210
30
- Electrolytically plated or coated with zinc:
...
...
...
- - Containing by weight less than 0.6% of carbon:
7210
30
11
- - - Of a thickness not exceeding 1.2 mm
10
7210
...
...
...
19
- - - Other
5
- - Containing by weight 0.6% or more of carbon:
7210
...
...
...
91
- - - Of a thickness not exceeding 1.2 mm
10
7210
30
99
- - - Other
5
...
...
...
‑ Otherwise plated or coated with zinc:
7210
41
- - Corrugated:
7210
...
...
...
10
- - - Of a thickness not exceeding 1.2 mm
10
7210
41
90
- - - Other
10
7210
...
...
...
- - Other:
7210
49
10
- - - Of a thickness not exceeding 1.2 mm
10
7210
...
...
...
90
- - - Other
10
7210
50
00
- Plated or coated with chromium oxides or with chromium and chromium oxides
0
...
...
...
‑ Plated or coated with aluminium:
7210
61
- - Plated or coated with aluminium-zinc alloys:
7210
...
...
...
10
- - - Of a thickness not exceeding 1.2 mm
10
7210
61
90
- - - Other
10
7210
...
...
...
- - Other:
7210
69
10
- - - Of a thickness not exceeding 1.2 mm
10
7210
...
...
...
90
- - - Other
10
7210
70
- Painted, varnished or coated with plastics:
...
...
...
- - Not clad, plated or coated with metal:
7210
70
11
- - - Of a thickness of 4.75 mm or more but not exceeding 125 mm
10
7210
...
...
...
12
- - - Of a thickness less than 4.75 mm or exceeding 125 mm
10
7210
70
20
- - Plated or coated with tin, lead or chromium oxide or with chromium and chromium oxide
3
7210
...
...
...
30
- - Electrolytically plated or coated with zinc, of thickness not exceeding 1.2 mm
10
7210
70
40
- - Electrolytically plated or coated with zinc, of thickness exceeding 1.2 mm
5
7210
...
...
...
50
- - Otherwise plated or coated with zinc or aluminium, of thickness exceeding 1.2 mm
10
7210
70
60
- - Plated or coated with zinc or aluminium, of a thickness not exceeding 1.2 mm
10
7210
...
...
...
70
- - Plated or coated with other metals, of a thickness not exceeding 1.2 mm
0
7210
70
90
- - Other
0
7210
...
...
...
- Other:
- - Not clad, plated or coated with metal:
7210
...
...
...
11
- - - Of a thickness of 4.75 mm or more but not exceeding 125 mm
5
7210
90
12
- - - Of a thickness less than 4.75 mm or exceeding 125 mm
5
7210
...
...
...
20
- - Plated or coated with tin, lead or chromium oxide or with chromium and chromium oxide
3
7210
90
30
- - Electrolytically plated or coated with zinc, of thickness not exceeding 1.2 mm
10
7210
...
...
...
40
- - Electrolytically plated or coated with zinc, of thickness exceeding 1.2 mm
5
7210
90
50
- - Otherwise plated or coated with zinc or aluminium, of thickness exceeding 1.2 mm
10
7210
...
...
...
60
- - Plated or coated with zinc or aluminium, of a thickness not exceeding 1.2 mm
10
7210
90
70
- - Plated or coated with other metals, of a thickness not exceeding 1.2 mm
0
7210
...
...
...
90
- - Other
0
7213
Bars and rods, hot‑rolled, in irregularly wound coils, of iron or non‑alloy steel
7213
...
...
...
- Containing indentations, ribs, grooves or other deformations produced during the rollingprocess:
7213
10
10
- - Of circular cross-section measuring not exceeding 50 mm²
10
7213
...
...
...
20
- - Of rectangular (including square) cross-section not exceeding 20 mm in width
10
7213
10
90
- - Other
10
7213
...
...
...
- Other, of free‑cutting steel:
7213
20
10
- - With an average diameter of 5 mm to 20 mm
0
7213
...
...
...
90
- - Other
0
‑ Other:
7213
...
...
...
- - Of circular cross‑section measuring less than 14mm in diameter:
7213
91
10
- - - For making soldering bars
5
...
...
...
- - - Other:
7213
91
91
- - - - Concrete steel
10
7213
...
...
...
92
- - - - Cold heading in coil
10
7213
91
93
- - - - Shaft bars; manganese steel
10*
7213
...
...
...
99
- - - - Other
10*
7213
99
- - Other:
7213
...
...
...
10
- - - For making soldering bars
5
- - - Other:
7213
...
...
...
91
- - - - Concrete steel
10
7213
99
92
- - - - Cold heading in coil
10
7213
...
...
...
93
- - - - Shaft bars; manganese steel
10*
7213
99
99
- - - - Other
10*
7214
...
...
...
Other bars and rods of iron or non‑alloy steel, not further worked than forged, hot‑rolled, hot‑drawn or hot‑extruded, but including those twisted after rolling
7214
10
- Forged:
7214
...
...
...
10
- - Containing by weight less than 0.6% of carbon
10*
7214
10
20
- - Containing by weight 0.6% or more of carbon
10*
7214
...
...
...
00
- Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
10*
7214
30
00
- Other, of free‑cutting steel
0
...
...
...
‑ Other:
7214
91
- - Of rectangular (other than square) cross-section
...
...
...
- - - Containing by weight less than 0.6% of carbon:
7214
91
11
- - - - Concrete steel
10
7214
...
...
...
12
- - - - Shaft bars; manganese steel
10*
7214
91
19
- - - - Other
10*
...
...
...
- - - Containing by weight 0.6% or more of carbon:
7214
91
21
- - - - Concrete steel
10
7214
...
...
...
22
- - - - Shaft bars; manganese steel
10*
7214
91
29
- - - - Other
10*
7214
...
...
...
- - Other:
- - - Containing by weight less than 0.25% of carbon:
7214
...
...
...
11
- - - - Concrete steel
10
7214
99
12
- - - - Shaft bars; manganese steel
10*
7214
...
...
...
19
- - - - Other
10*
- - - Containing by weight 0.25% or more but less than 0.6% of carbon:
7214
...
...
...
21
- - - - Concrete steel
10
7214
99
22
- - - - Shaft bars; manganese steel
10*
7214
...
...
...
29
- - - - Other
10*
- - - Containing by weight 0.6% or more of carbon:
7214
...
...
...
31
- - - - Concrete steel
10
7214
99
32
- - - - Shaft bars; manganese steel
10*
7214
...
...
...
39
- - - - Other
10*
7215
Other bars and rods of iron or non‑alloy steel
7215
...
...
...
00
- Of free‑cutting steel, not further worked than cold‑formed or cold‑finished
0
7215
50
00
- Other, not further worked than cold‑formed or cold‑finished
10*
7215
...
...
...
- Other:
- - Containing by weight less than 0.6% of carbon:
7215
...
...
...
11
- - - Other than manganese steel or shaft bars
10*
7215
90
19
- - - Other
10*
7215
...
...
...
20
- - Containing by weight 0.6% or more of carbon
10*
7216
Angles, shapes and sections of iron or non‑alloy steel
7216
...
...
...
00
- U, I or H sections, not further worked than hot‑rolled, hot‑drawn or extruded, of a height of less than 80 mm
10
‑ L or T sections, not further worked than hot‑rolled, hot‑drawn or extruded, of a height of less than 80 mm:
7216
...
...
...
00
- - L sections
10
7216
22
00
- - T sections
10
...
...
...
‑ U, I or H sections, not further worked than hot‑rolled, hot‑drawn or extruded of a height of 80 mm or more:
7216
31
- - U sections:
...
...
...
- - - Containing by weight 0.6% or more of carbon:
7216
31
11
- - - - Of a height of 80 mm or more but not exceeding 140 mm
10
7216
...
...
...
19
- - - - Other
10
- - - Other:
7216
...
...
...
91
- - - - Of a height of 80 mm or more but not exceeding 140 mm
10
7216
31
99
- - - - Other
10
7216
...
...
...
- - I sections:
- - - Containing by weight 0.6% or more of carbon:
7216
...
...
...
11
- - - - Of a height of 80 mm or more but not exceeding 140 mm
10
7216
32
19
- - - - Other
10
...
...
...
- - - Other:
7216
32
91
- - - - Of a height of 80 mm or more but not exceeding 140 mm
10
7216
...
...
...
99
- - - - Other
10
7216
33
- - H sections:
...
...
...
- - - Containing by weight 0.6% or more of carbon:
7216
33
11
- - - - Of a height of 80 mm or more but not exceeding 140 mm
10
7216
...
...
...
19
- - - - Other
10
- - - Other:
7216
...
...
...
91
- - - - Of a height of 80 mm or more but not exceeding 140 mm
10
7216
33
99
- - - - Other
10
7216
...
...
...
- L or T sections, not further worked than hot‑rolled, hot‑drawn or extruded, of a height of 80 mm or more:
- - Containing by weight 0.6% or more of carbon:
7216
...
...
...
11
- - - L sections of a height of 80 mm or more but not more than 140 mm
10
7216
40
19
- - - Other
10
...
...
...
- - Other:
7216
40
91
- - - L sections of a height of 80 mm or more but not more than 140 mm
10
7216
...
...
...
99
- - - Other
10
7216
50
- Other angles, shapes and sections, not further worked than hot‑rolled, hot‑drawn or extruded:
...
...
...
- - Containing by weight 0.6% or more of carbon:
7216
50
11
- - - Of a height of less than 80 mm
10
7216
...
...
...
19
- - - Other
10
- - Other:
7216
...
...
...
91
- - - Of a height of less than 80 mm
10
7216
50
99
- - - Other
10
...
...
...
‑ Angles, shapes and sections, not further worked than cold‑formed or cold‑finished:
7216
61
00
- - Obtained from flat-rolled products
10
7216
...
...
...
- - Other:
- - - Angles, other than slotted angles:
7216
...
...
...
11
- - - - Containing by weight 0.6% or more carbon and having a height of 80 mm or more
10
7216
69
12
- - - - Containing by weight 0.6% or more carbon and having a height of less than 80 mm
10
7216
...
...
...
13
- - - - Other, of a height of 80 mm or more
10
7216
69
14
- - - - Other, of a height of less than 80 mm
10
...
...
...
- - - Other angles, shapes and sections:
7216
69
21
- - - - Of a thickness of 5 mm or less
10
7216
...
...
...
29
- - - - Other
10
‑ Other:
7216
...
...
...
- - Cold-formed or cold-finished from flat-rolled products:
- - - Angles, other than slotted angles:
7216
...
...
...
11
- - - - Containing by weight 0.6% or more carbon and having a height of 80 mm or more
10
7216
91
12
- - - - Containing by weight 0.6% or more carbon and having a height of less than 80 mm
10
7216
...
...
...
13
- - - - Other, of a height of 80 mm or more
10
7216
91
14
- - - - Other, of a height of less than 80 mm
10
7216
...
...
...
20
- - - Slotted angles, roll-formed from pure-punched steel strips, whether or not painted or galvanised
10
- - - Shapes and sections:
7216
...
...
...
31
- - - - Of a thickness of 5 mm or less
10
7216
91
39
- - - - Other
10
7216
...
...
...
00
- - Other
10
7217
Wire of iron or non‑alloy steel
7217
...
...
...
‑ Not plated or coated, whether or not polished:
7217
10
10
- - Containing by weight less than 0.25% of carbon:
10
...
...
...
- - Containing by weight 0.25% or more but less than 0.6% of carbon:
7217
10
21
- - - Spokes wire
5
7217
...
...
...
22
- - - Bead wire; flat hard steel reed wire; prestressed concrete steel wire; free cutting steel wire
5
7217
10
29
- - - Other
5
...
...
...
- - Containing by weight 0.6% or more of carbon:
7217
10
31
- - - Spokes wire; bead wire; flat hard steel reed wire; prestressed concrete steel wire; free cutting steel wire
5
7217
...
...
...
39
- - - Other
5
7217
20
- Plated or coated with zinc:
7217
...
...
...
10
- - Containing by weight less than 0.25% carbon
10
- - Containing by weight 0.25% or more but less than 0.45% of carbon:
7217
...
...
...
21
- - - Electrolytic coated and spokes wire
5
7217
20
22
- - - Flat hard steel reed wire; prestressed concrete steel wire; steel wire with silicon content not less than 0.1%, zinc plated with layer weight not less than 240 g/m²
5
7217
...
...
...
29
- - - Other
5
- - Containing by weight 0.45% or more but less than 0.6% of carbon:
7217
...
...
...
31
- - - Electrolytic coated and spokes wire
5
7217
20
32
- - - Flat hard steel reed wire; prestressed concrete steel wire; steel wire with silicon content not less than 0.1%, zinc plated with layer weight not less than 240 g/m²
5
7217
...
...
...
33
- - - High carbon steel core wire for Aluminium Conductors Steel Reinforced (ACSR)
5
7217
20
39
- - - Other
5
...
...
...
- - Containing by weight 0.6% or more of carbon:
7217
20
41
- - - Electrolytic coated and spokes wire
5
7217
...
...
...
42
- - - Flat hard steel reed wire; prestressed concrete steel wire; steel wire with silicon content not less than 0.1%, zinc plated with layer weight not less than 240 g/m²
5
7217
20
43
- - - High carbon steel core wire for Aluminium Conductors Steel Reinforced (ACSR)
5
7217
...
...
...
49
- - - Other
5
7217
30
- Plated or coated with other base metals:
7217
...
...
...
10
- - Containing by weight less than 0.25% of carbon
10
7217
30
20
- - Containing by weight 0.25% or more of carbon but less than 0.6% of carbon
5
...
...
...
- - Containing by weight 0.6% or more of carbon:
- - - Beadwire (copper alloy coated high carbon steel wire for pneumatic rubber tyres):
7217
...
...
...
31
- - - - Beadwire (brass coated high carbon steel wire for pneumatic rubber tyres)
5
7217
30
32
- - - - Beadwire (coated with other copper alloys, high carbon steel wire for pneumatic rubber tyres)
5
7217
...
...
...
33
- - - - Plated or coated with tin
5
7217
30
39
- - - - Other
5
7217
...
...
...
90
- - Other
5
7217
90
- Other:
7217
...
...
...
10
- - Containing by weight of not less than 0.1% of silicon and plated with zinc having a layer weight not less than 240 g/m² and covered with PVC as an outer layer
5
7217
90
20
- - Other containing by weight less than 0.25% of carbon, excluding the goods of subheading 7217.90.10
10
7217
...
...
...
30
- - Other containing by weight 0.25% or more but less than 0.45% of carbon, excluding goods of subheading 7217.90.10
5
7217
90
40
- - Other containing by weight 0.45% or more but less than 0.6% of carbon, excluding goods of subheading 7217.90.10
5
7217
...
...
...
50
- - Other containing by weight 0.6% or more of carbon, excluding goods of subheading 7217.90.10
5
7303
Tubes, pipes and hollow profiles, of cast iron
...
...
...
- Tubes and pipes:
7303
00
11
- - With an external diameter not exceeding 100 mm
10
7303
...
...
...
12
- - With an external diameter exceeding 100 mm but not exceeding 150 mm
10
7303
00
13
- - with an external diameter exceeding 150 mm but not more than 600 mm
10
7303
...
...
...
19
- - Other
10
- Other, of ductile cast iron:
7303
...
...
...
21
- - With an external diameter not exceeding 100 mm
3
7303
00
22
- - Other
3
...
...
...
- Other:
7303
00
91
- - With an external diameter not exceeding 100 mm
3
7303
...
...
...
92
- - Other
3
7305
Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross‑sections, the external diameter of which exceeds 406.4 mm, of iron or steel
...
...
...
‑ Line pipe of a kind used for oil or gas pipelines:
7305
11
00
- - Longitudinally submerged arc welded
5
7305
...
...
...
00
- - Other, longitudinally welded
5
7305
19
00
- - Other
10
7305
...
...
...
00
- Casing of a kind used in drilling for oil or gas
5
‑ Other, welded:
7305
...
...
...
- - Longitudinally welded:
- - - Stainless steel pipes and tubes:
7305
...
...
...
11
- - - - High pressure conduits
5
7305
31
19
- - - - Other
5
...
...
...
- - - Other:
7305
31
91
- - - - High pressure conduits
5
7305
...
...
...
99
- - - - Other
5
7305
39
- - Other:
7305
...
...
...
10
- - - High pressure conduits
5
7305
39
90
- - - Other
10
7305
...
...
...
- Other:
7305
90
10
- - High pressure conduits
5
7305
...
...
...
90
- - Other
5
7306
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
7306
...
...
...
00
- Line pipe of a kind used for oil or gas pipelines
5
7306
20
00
- Casing and tubing of a kind used in drilling for oil or gas
5
7306
...
...
...
- Other, welded, of circular cross‑section, of iron or non‑alloy steel:
- - With internal diameter less than 12.5 mm:
7306
...
...
...
11
- - - High pressure conduits
5
7306
30
12
- - - Boiler tubes
10
7306
...
...
...
13
- - - Single or double-walled, copper-plated or fluororesin-coated (FRC) or zinc- chromated (ZMC3) steel tubes of an external diameter not exceeding 15 mm
10
7306
30
14
- - - Sheath pipe (heater pipe) for heating elements of electric flat iron and rice cooker, of an external diameter not exceeding 12 mm
10
7306
...
...
...
15
- - - Other, containing by weight less than 0.45% of carbon
10
7306
30
19
- - - Other
10
...
...
...
- - With internal diameter of 12.5 mm or more:
7306
30
21
- - - High pressure conduits
5
7306
...
...
...
22
- - - Boiler tubes
10
7306
30
23
- - - Single or double-walled, copper-plated or fluororesin-coated (FRC) or zinc- chromated (ZMC3) steel tubes of an external diameter not exceeding 15 mm
10
7306
...
...
...
24
- - - Other, of external diameter less than 140 mm and containing by weight less than 0.45% of carbon
10
7306
30
25
- - - Other, of external diameter 140 mm or more and containing by weight less than 0.45% of carbon
10
7306
...
...
...
26
- - - Other, of external diameter less than 140 mm and containing by weight 0.45% or more of carbon
10
7306
30
27
- - - Other, of external diameter 140 mm or more and containing by weight 0.45% or more of carbon
10
7306
...
...
...
- Other, welded, of circular cross‑section, of stainless steel:
7306
40
10
- - Welded boiler tubes with internal diameter not exceeding 12.5 mm
5
7306
...
...
...
20
- - Welded boiler tubes with internal diameter exceeding 12.5 mm
5
7306
40
30
- - Stainless steel pipes and tubes, with external diameter exceeding 105 mm
5
7306
...
...
...
40
- - High pressure conduits
5
7306
40
50
- - Pipes and tubes containing by weight at least 30% of nickel, of external diameter not exceeding 10 mm
5
7306
...
...
...
80
- - Other, with internal diameter not exceeding 12.5 mm
5
7306
40
90
- - Other, with internal diameter exceeding 12.5 mm
5
7306
...
...
...
- Other, welded, of circular cross‑section, of other alloy steel:
7306
50
10
- - Welded boiler tubes with internal diameter not exceeding 12.5 mm
5
7306
...
...
...
20
- - Welded boiler tubes with internal diameter exceeding 12.5 mm
5
7306
50
30
- - High pressure conduits
5
7306
...
...
...
40
- - Other, with internal diameter not exceeding 12.5 mm
5
7306
50
50
- - Other, with internal diameter exceeding 12.5 mm
5
7306
...
...
...
- Other, welded, of non‑circular cross‑section:
- - With internal diameter of less than 12.5 mm:
7306
...
...
...
11
- - - High pressure conduits
5
7306
60
19
- - - Other
5
...
...
...
- - Other:
7306
60
91
- - - High pressure conduits
5
7306
...
...
...
99
- - - Other
5
7306
90
- Other:
...
...
...
- - With internal diameter of less than 12.5 mm:
7306
90
11
- - - Bundy-weld pipes and tubes
10
7306
...
...
...
12
- - - High pressure conduits
5
7306
90
19
- - - Other
10
...
...
...
- - Other:
7306
90
91
- - - Bundy-weld pipes and tubes
10
7306
...
...
...
92
- - - High pressure conduits
5
7306
90
93
- - - Other, of external diameter measuring less than 140 mm and containing by weight less than 0.45% of carbon
10
7306
...
...
...
94
- - - Other, of external diameter measuring 140 mm or more and containing by weight less than 0.45% of carbon
10
7306
90
99
- - - Other
10
7308
...
...
...
Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge‑sections, lock‑gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel
7308
10
- Bridges and bridge‑sections:
7308
...
...
...
10
- - Prefabricated modular type joined by shear connectors
0
7308
10
90
- - Other
0
7308
...
...
...
- Towers and lattice masts:
- - Towers:
7308
...
...
...
11
- - - Prefabricated modular type joined by shear connectors
0
7308
20
19
- - - Other
0
...
...
...
- - Lattice masts:
7308
20
21
- - - Prefabricated modular type joined by shear connectors
5
7308
...
...
...
29
- - - Other
5
7308
30
00
- Doors, windows and their frames and thresholds for doors
10
7308
...
...
...
- Equipment for scaffolding, shuttering, propping or pit‑propping:
7308
40
10
- - Prefabricated modular type joined by shear connectors
0
7308
...
...
...
90
- - Other
0
7308
90
- Other:
7308
...
...
...
10
- - Frameworks for workshop and store-house
10
7308
90
20
- - Other, prefabricated modular type joined by shear connectors
10
7308
...
...
...
30
- - Corrugated, curved or bent galvanized plate for assembly into underground conduits and culverts
10
7308
90
40
- - Parts of tubes or tunnels, made of formed and bended corrugated sheet of iron or steel
10
7308
...
...
...
90
- - Other
10
- 1Decision No. 69/2005/QD-BTC, on the list of amended preferential rates of import duty applicable to a number of goods in the Preferential Import Tariffs, issued by the Ministry of Finance.
- 2Decision No. 110/2003/QD-BTC of July 25, 2003, promulgating the preferential import tariffs.
- 3Decision No. 110/2003/QD-BTC of July 25, 2003, promulgating the preferential import tariffs.
Decision No.71/2004/QD-BTC of August 31, 2004 adjusting the preferential import tax rates of a number of iron and steel commodities
- Số hiệu: 71/2004/QD-BTC
- Loại văn bản: Quyết định
- Ngày ban hành: 31/08/2004
- Nơi ban hành: Bộ Tài chính
- Người ký: Nguyễn Ngọc Tuấn
- Ngày công báo: Đang cập nhật
- Số công báo: Đang cập nhật
- Ngày hiệu lực: Kiểm tra
- Tình trạng hiệu lực: Kiểm tra