Hệ thống pháp luật

THE MINISTRY OF FINANCE
-----

SOCIALIST REPUBLIC OF VIET NAM
Independence - Freedom - Happiness
-------

No: 12/2003/QD-BTC

Hanoi , January 24, 2003

 

DECISION

PROMULGATING THE RATES OF CHARGES FOR INSPECTION OF THE TECHNICAL SAFETY AND QUALITY OF EQUIPMENT AND SUPPLIES FALLING UNDER THE SCOPE OF SUPERVISION BY VIETNAM REGISTRY

THE MINISTER OF FINANCE

Pursuant to the Government's Decree No. 86/2002/ND-CP of November 5, 2002 defining the functions, tasks, powers and organizational structure of the ministries and ministerial-level agencies;
Pursuant to the Government's Decree No. 178/CP of October 28, 1994 on the tasks, powers and organizational structure of the Ministry of Finance;
Pursuant to August 28, 2001 Ordinance No. 38/2001/PL-UBTVQH on Charges and Fees; pursuant to the Government's Decree No. 57/2002/ND-CP of June 3, 2002 detailing the implementation of the Ordinance on Charges and Fees;
At the proposals of the Ministry of Communications and Transport in Official Dispatch No. 4283/GTVT-TCKT of November 13, 2002 and of the director of the Enterprise Finance Department,

DECIDES:

Article 1.- To promulgate together with this Decision the Regulation on the rates of charges for inspection of the technical safety and quality of equipment and supplies falling under the scope of supervision by Vietnam Registry, including:

1. Charges for approval of the designs of equipment and supplies.

2. Charges for inspection of the quality of products.

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



4. Charges for inspection of the quality of containers.

5. Charges for inspection of the quality of lifting equipment;

6. Charges for inspection of the quality of boilers and pressure equipment.

7. Charges for inspection of equipment and supplies by non-destruction methods.

8. Charges for examination of welders and non-destruction testers.

Article 2.- The charge rates in this Table of Charges are inclusive of value-added tax but exclusive of the fee for the granting of technical safety and quality certificates as well as expenses for accommodation, travel and communication in service of the inspection works conducted at places over 100 km far from the inspection offices.

Article 3.- For inspection works not yet specified in this Table of Charges, the inspection charges shall be calculated according to the inspection duration at the rate of VND 100,000 per hour. The minimum charge per inspection is VND 100,000/inspection.

Article 4.- The charge payers prescribed in this Decision are organizations and individuals for whom the Vietnam Registry offices inspect the quality of their equipment and supplies installed on transport means; inspect the standards of manufacturing establishments, testing stations, laboratories, and other subjects falling under the scope of supervision by Vietnam Registry or at request..

Article 5.- A number of terms used in this Table of Charges are construed as follows:

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



2. Model products are products made for the first time to satisfy the requirements of current technical norms and standards, serving as a basis for permitted mass production.

3. Mass-manufactured products are products manufactured in lots compatible with the approved model products.

4. Charge calculation prices are selling prices for home-made products or buying prices or imported products.

Article 6.- This Decision takes effect as from February 1, 2003 and replaces the Table of Charges for inspection of industrial equipment, supplies and products, prescribed in Decision No. 129/1999/QD-BVGCP of December 16, 1999 of the Government Pricing Committee on the charges for services of registry of sea ships, inland waterway means and industrial products of Vietnamese organizations and individuals, which fall under the scope of registration by Vietnam Registry, and relevant guiding documents.

Article 7.- Organizations and individuals being charge payers, inspection agencies and concerned agencies shall have to implement this Decision.

 

 

FOR THE MINISTER OF FINANCE
VICE MINISTER




Tran Van Ta

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



I. CHARGES FOR APPROVAL OF THE DESIGNS OF EQUIPMENT AND SUPPLIES

1. The charge rates for approval of the designs of equipment or supplies shall be calculated in % of the costs of the designs of equipment or supplies specified in Table 1.

Table 1

Ordinal number

Cost of design (in VND million)

Charge rates (%)

1

Up to 10

6.0

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 10 and 50

5.5

3

Between over 50 and 100

5.0

4

Between over 100 and 200

4.5

5

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



4.0

 

2. The charge rates for approval of the transformation or repair designs shall be equal to 70% of those specified in Table 1.

3. The charge rates for duplication of the approval decisions or approval of modifications of the approved designs shall be equal to 30% of those specified in Table 1.

II. CHARGES FOR INSPECTION OF THE QUALITY OF PRODUCTS

The charge rates for inspection of the quality of products shall be calculated in percentage of the manufacture costs; the prices of product lots or the buying prices of imported products specified in Table 2.

Table 2

Ordinal number

Inspected objects

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Minimum (in VND thousand) charge

1

Model or single products

1.0

500

2

Mass-manufactured or imported products

0.5

300

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



III. CHARGES FOR INSPECTION AND CERTIFICATION OF LABORATORIES, TESTING STATIONS, AND ESTABLISHMENTS MANUFACTURING MATERIALS AND PRODUCTS

The charge rates for inspection and certification of laboratories, testing stations or establishments manufacturing materials and products are specified in Table 3.

Table 3

Inspected objects

Charge rates (in VND thousand)

First-time inspection

Periodical inspection

Laboratories, testing stations and establishments manufacturing materials and products

2,000

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



 

IV. CHARGES FOR INSPECTION OF THE QUALITY OF CONTAINERS

1. The charge rates for inspection of the quality of 20-feet containers are specified in Table 4

Table 4

Ordinal number

20-feet containers

Charge rates (in VND thousand)

1

For dry merchandise

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



2

Isothermal containers for liquid merchandise, and containers of other kinds

250

 

2. The charge rates for inspection of 40-feet containers shall be the charge rates specified in Table 4 multiplied by co-efficient 1.5.

V. CHARGES FOR INSPECTION OF THE QUALITY OF LIFTING EQUIPMENT

1. The charge rates for first-time and irregular inspections are specified in Table 5.

Table 5

Ordinal number

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Charge rates (in VND thousand)

1

Under 1

500

2

Between 1 and 3

600

3

Between over 3 and 5

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



4

Between over 5 and 7.5

1,000

5

Between over 7.5 and 10

1,500

6

Between over 10 and 15

1,700

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 15 and 20

2,000

8

Between over 20 and 30

2,500

9

Between over 30 and 50

2,700

10

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



3,000

11

Between over 75 and 100

3,500

12

Over 100

4,000

 

2. The charge rates for periodical inspection shall be equal to 50% of those specified in Table 5

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



The charge rates for inspection of the quality of boilers and pressure devices are specified in Table 6.

Table 6

Ordinal number

Inspected objects

Calculation unit

Capacity

Charge rates (in VND thousand)

1

Boilers

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Under 0.5

300

 

 

 

Between 0.5 and 1

500

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 1 and 2

1,000

 

 

 

Between over 2 and 4

1,500

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 4 and 6

1,800

 

 

 

Between over 6 and 10

2,200

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 10 and 25

4,000

 

 

 

Between over 25 and 75

6,000

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 75 and 125

8,000

 

 

 

Between over 125 and 200

13,000

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 200 and 400

18,000

 

 

 

Over 400

22,000

2

Pressure vessels

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Under 1

150

 

 

 

Between 1 and 2

300

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 2 and 5

400

 

 

 

Between over 5 and 10

600

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 10 and 25

800

 

 

 

Between over 25 and 50

1,000

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 50 and 100

2,500

 

 

 

Between over 100 and 500

4,000

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Over 500

6,000

3

Gas bottles

Bottle

Standard bottle

60

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Non-standard bottle

80

4

Cold system

1,000 kcal/h

Under 30

1,000

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between 30 and 50

1,500

 

 

 

Between over 50 and 100

2,000

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Between over 100 and 250

2,500

 

 

 

Between over 250 and 1,000

3,000

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Over 1,000

4,000

5

Gas regulating and charging systems

System

System with 20 charging gates or under

2,000

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Systems with 21 charging gates or more

3,000

6

Assorted pipelines, excluding solvents

meter

Diameter of 150 mm or under

10

 

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



Diameter of over 150 mm

15

 

VII. CHARGES FOR INSPECTION OF THE QUALITY OF EQUIPMENT AND SUPPLIES BY NON-DESTRUCTION METHODS

1. The charge rates for inspection of the quality of equipment and supplies by non-destruction methods are specified in Table 7.

Table 7

Ordinal number

Inspecting, measuring and testing methods

Calculation unit

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



1

Measuring the materials' thickness

Measuring point

8

2

Scanning defects by ultrasound

Meter of welding line

80

 

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



VIII. CHARGES FOR EXAMINATION OF WELDERS AND NON-DESTRUCTION TESTERS

The charge rates for examination and granting or extension of welder's or non-destruction tester's certificates are specified in Table 8.

Table 8

Ordinal number

Examined or certified subjects

First-time exam

Extension

1

Welders

...

...

...

Please sign up or sign in to your Pro Membership to see English documents.



200

2

Non-destruction testers

600

300

 

HIỆU LỰC VĂN BẢN

Decision No. 12/2003/QD-BTC of January 24, 2003, promulgating the rates of charges for inspection of the technical safety and quality of equipment and supplies falling under the scope of supervision by Vietnam registry

  • Số hiệu: 12/2003/QD-BTC
  • Loại văn bản: Quyết định
  • Ngày ban hành: 24/01/2003
  • Nơi ban hành: Bộ Tài chính
  • Người ký: Trần Văn Tá
  • Ngày công báo: Đang cập nhật
  • Số công báo: Đang cập nhật
  • Ngày hiệu lực: 01/02/2003
  • Ngày hết hiệu lực: 01/01/2014
  • Tình trạng hiệu lực: Hết hiệu lực
Tải văn bản